1.0 KiB
1.0 KiB
ThrottleQuadrant
A simple 6 axis throttle quadrant for Arduino Micro or Leonardo Version 1.0
Jarno Rankinen
Requirements: Arduino Micro (or Leonardo, as long as its with the ATMega32U4 chip)
6 linear slide potentiometers (10 kOhm is OK)
Wires
USB-microUSB cable
Breadboard (optional)
Arduino IDE
Arduino Joystick library: https://github.com/MHeironimus/ArduinoJoystickLibrary/tree/version-1.0 This sketch uses the Joystick.h -library Download ZIP and place Joystick folder to your Documents/Arduino/libraries directory
Wiring: For each slider, connect the
- slider's GND to Arduino GND
- slider's VCC to corresponding analog input
The SIGNAL pin of the slider is left unconnected.
The pins in the slider are as follows:
_____
| | | Vcc
| | | SIG
| |
| |
| |
| |
| |
| | | GND
|_____|
Follow the instructions in the beginning of ThrottleQuadrant.ino to calibrate the sliders.
Enjoy flying!