2019-12-31 14:09:12 +02:00
|
|
|
# ThrottleQuadrant
|
2020-01-06 07:36:20 +02:00
|
|
|
A simple 6 axis throttle quadrant for Arduino Micro or Leonardo
|
2019-12-31 14:51:02 +02:00
|
|
|
Version 1.0
|
|
|
|
|
|
|
|
|
|
Jarno Rankinen
|
|
|
|
|
|
|
|
|
|
Requirements:
|
|
|
|
|
Arduino Micro (or Leonardo, as long as its with the ATMega32U4 chip)
|
|
|
|
|
|
|
|
|
|
6 linear slide potentiometers (10 kOhm is OK)
|
|
|
|
|
|
|
|
|
|
Wires
|
|
|
|
|
|
|
|
|
|
USB-microUSB cable
|
|
|
|
|
|
|
|
|
|
Breadboard (optional)
|
|
|
|
|
|
|
|
|
|
Arduino IDE
|
|
|
|
|
|
|
|
|
|
Arduino Joystick library: https://github.com/MHeironimus/ArduinoJoystickLibrary/tree/version-1.0
|
2020-01-06 07:36:20 +02:00
|
|
|
This sketch uses the Joystick.h -library
|
|
|
|
|
Download ZIP and place Joystick folder to your Documents/Arduino/libraries directory
|
2019-12-31 14:51:02 +02:00
|
|
|
|
|
|
|
|
Wiring:
|
|
|
|
|
For each slider, connect the
|
|
|
|
|
- slider's GND to Arduino GND
|
|
|
|
|
- slider's VCC to corresponding analog input
|
|
|
|
|
|
|
|
|
|
The SIGNAL pin of the slider is left unconnected.
|
|
|
|
|
|
|
|
|
|
The pins in the slider are as follows:
|
|
|
|
|
|
|
|
|
|
_____
|
|
|
|
|
| | | Vcc
|
|
|
|
|
| | | SIG
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| | | GND
|
|
|
|
|
|_____|
|
|
|
|
|
|
|
|
|
|
Follow the instructions in the beginning of ThrottleQuadrant.ino to calibrate the sliders.
|
|
|
|
|
|
|
|
|
|
Enjoy flying!
|
