Readme updated
This commit is contained in:
parent
36842388ae
commit
9c16455bcf
44
README.md
44
README.md
|
@ -1,2 +1,46 @@
|
|||
# ThrottleQuadrant
|
||||
A simple 6 axis (3 joysticks x 2 axis) throttle quadrant for Arduino Micro or Leonardo
|
||||
Version 1.0
|
||||
|
||||
Jarno Rankinen
|
||||
|
||||
Requirements:
|
||||
Arduino Micro (or Leonardo, as long as its with the ATMega32U4 chip)
|
||||
|
||||
6 linear slide potentiometers (10 kOhm is OK)
|
||||
|
||||
Wires
|
||||
|
||||
USB-microUSB cable
|
||||
|
||||
Breadboard (optional)
|
||||
|
||||
Arduino IDE
|
||||
|
||||
Arduino Joystick library: https://github.com/MHeironimus/ArduinoJoystickLibrary/tree/version-1.0
|
||||
This sketch uses the Joystick3.h -library
|
||||
Download ZIP and place Joystick3 folder to your Documents/Arduino/libraries directory
|
||||
|
||||
Wiring:
|
||||
For each slider, connect the
|
||||
- slider's GND to Arduino GND
|
||||
- slider's VCC to corresponding analog input
|
||||
|
||||
The SIGNAL pin of the slider is left unconnected.
|
||||
|
||||
The pins in the slider are as follows:
|
||||
|
||||
_____
|
||||
| | | Vcc
|
||||
| | | SIG
|
||||
| |
|
||||
| |
|
||||
| |
|
||||
| |
|
||||
| |
|
||||
| | | GND
|
||||
|_____|
|
||||
|
||||
Follow the instructions in the beginning of ThrottleQuadrant.ino to calibrate the sliders.
|
||||
|
||||
Enjoy flying!
|
||||
|
|
Loading…
Reference in New Issue