From 9c16455bcf5c284f3069c71df2dabce6355ea120 Mon Sep 17 00:00:00 2001
From: Jarno Rankinen <50285623+jarnorankinen@users.noreply.github.com>
Date: Tue, 31 Dec 2019 14:51:02 +0200
Subject: [PATCH] Readme updated

---
 README.md | 44 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/README.md b/README.md
index 1e34901..3462964 100644
--- a/README.md
+++ b/README.md
@@ -1,2 +1,46 @@
 # ThrottleQuadrant
 A simple 6 axis (3 joysticks x 2 axis) throttle quadrant for Arduino Micro or Leonardo
+Version 1.0
+
+Jarno Rankinen
+
+Requirements:
+  Arduino Micro (or Leonardo, as long as its with the ATMega32U4 chip)
+  
+  6 linear slide potentiometers (10 kOhm is OK)
+  
+  Wires
+  
+  USB-microUSB cable
+  
+  Breadboard (optional)
+
+  Arduino IDE
+
+  Arduino Joystick library: https://github.com/MHeironimus/ArduinoJoystickLibrary/tree/version-1.0
+    This sketch uses the Joystick3.h -library
+    Download ZIP and place Joystick3 folder to your Documents/Arduino/libraries directory
+
+Wiring:
+  For each slider, connect the 
+  - slider's GND to Arduino GND
+  - slider's VCC to corresponding analog input
+  
+  The SIGNAL pin of the slider is left unconnected.
+  
+  The pins in the slider are as follows:
+  
+        _____
+       | |   |  Vcc
+       |   | |  SIG
+       |     |
+       |     |
+       |     |
+       |     |
+       |     |
+       |  |  |  GND
+       |_____|
+       
+Follow the instructions in the beginning of ThrottleQuadrant.ino to calibrate the sliders.
+
+Enjoy flying!