rest:
  - resource: https://IP_ADDRESS:8888/api/v1/status
    scan_interval: 5
    verify_ssl: false
    sensor:
      - name: "Penguin operating mode"
        value_template: "{{ value_json['op_mode'] }}"
        icon: mdi:information
      - name: "Penguin room temperature 1"
        value_template: "{{ value_json['measurements']['room_temp1'] }}"
        unit_of_measurement: "°C"
        icon: mdi:thermometer
      - name: "Penguin after heater pct"
        value_template: "{{ value_json['heater_pct'] }}"
        unit_of_measurement: "%"
        icon: mdi:heating-coil
      - name: "Penguin heat recovery pct"
        value_template: "{{ value_json['hrc_pct'] }}"
        unit_of_measurement: "%"
        icon: mdi:recycle
      - name: "Penguin temperature setting"
        value_template: "{{ value_json['temp_setting'] }}"
        unit_of_measurement: "°C"
        icon: mdi:thermometer-check
      - name: "Penguin circulation fan pct"
        value_template: "{{ value_json['fan_pct'] }}"
        unit_of_measurement: "%"
        icon: mdi:fan
      - name: "Penguin HRC efficiency intake"
        value_template: "{{ value_json['hrc_efficiency_in'] }}"
        unit_of_measurement: "%"
        icon: mdi:recycle
      - name: "Penguin HRC efficiency extract"
        value_template: "{{ value_json['hrc_efficiency_ex'] }}"
        unit_of_measurement: "%"
        icon: mdi:recycle
      - name: "Penguin days until service"
        value_template: "{{ value_json['days_until_service'] }}"
        unit_of_measurement: "pv"
        icon: mdi:calendar
      - name: "Penguin supply air"
        value_template: "{{ value_json['measurements']['supply_heated'] }}"
        unit_of_measurement: "°C"
        icon: mdi:thermometer
      - name: "Penguin supply air hrc"
        value_template: "{{ value_json['measurements']['supply_hrc'] }}"
        unit_of_measurement: "°C"
        icon: mdi:thermometer
      - name: "Penguin intake air"
        value_template: "{{ value_json['measurements']['supply_intake'] }}"
        unit_of_measurement: "°C"
        icon: mdi:thermometer
      - name: "Penguin intake air 24h"
        value_template: "{{ value_json['measurements']['supply_intake_24h'] }}"
        unit_of_measurement: "°C"
        icon: mdi:thermometer
      - name: "Penguin supply air humidity"
        value_template: "{{ value_json['measurements']['supply_hum'] }}"
        unit_of_measurement: "%"
        icon: mdi:water-percent
      - name: "Penguin return water"
        value_template: "{{ value_json['measurements']['watertemp'] }}"
        unit_of_measurement: "°C"
        icon: mdi:water-thermometer-outline
      - name: "Penguin extract air"
        value_template: "{{ value_json['measurements']['extract_intake'] }}"
        unit_of_measurement: "°C"
        icon: mdi:thermometer
      - name: "Penguin waste air"
        value_template: "{{ value_json['measurements']['extract_hrc'] }}"
        unit_of_measurement: "°C"
        icon: mdi:thermometer
      - name: "Penguin extract air humidity"
        value_template: "{{ value_json['measurements']['extract_hum'] }}"
        unit_of_measurement: "%"
        icon: mdi:water-percent
      - name: "Penguin extract air humidity 48h"
        value_template: "{{ value_json['measurements']['extract_hum_48h'] }}"
        unit_of_measurement: "%"
        icon: mdi:water-percent
    binary_sensor:
      - name: "Penguin circulation adaptive"
        value_template: "{{ value_json['coils'][11]['value'] }}"
        icon: mdi:fan-auto
      - name: "Penguin max heating"
        value_template: "{{ value_json['coils'][6]['value'] }}"
        icon: mdi:heat-wave
      - name: "Penguin max cooling"
        value_template: "{{ value_json['coils'][7]['value'] }}"
        icon: mdi:snowflake
      - name: "Penguin boost"
        value_template: "{{ value_json['coils'][10]['value'] }}"
        icon: mdi:fan-plus
      - name: "Penguin overpressure"
        value_template: "{{ value_json['coils'][3]['value'] }}"
        icon: mdi:fireplace

template:
  - binary_sensor:
    - name: "Penguin max heating enabled"
      state: "{{ states('input_number.penguin_temperature_setting_helper') > states('sensor.penguin_room_temperature_1') }}"

rest_command:
  penguin_circulation_adaptive:
    url: https://IP_ADDRESS:8888/api/v1/coils/11/1
    method: POST
    icon: mdi:fan-auto
    verify_ssl: false
  penguin_circulation_manual:
    url: https://IP_ADDRESS:8888/api/v1/coils/11/0
    method: POST
    icon: mdi:fan
    verify_ssl: false
  penguin_boost_on:
    url: https://192.168.0.210:8888/api/v1/coils/10/1
    method: POST
    verify_ssl: false
  penguin_boost_off:
    url: https://192.168.0.210:8888/api/v1/coils/10/0
    method: POST
    verify_ssl: false
  penguin_overpressure_toggle:
    url: https://IP_ADDRESS:8888/api/v1/coils/3
    method: POST
    icon: mdi:arrow-expand-all
    verify_ssl: false
  penguin_max_heating_on:
    url: https://IP_ADDRESS:8888/api/v1/coils/6/1
    method: POST
    icon: mdi:heat-wave
    verify_ssl: false
  penguin_max_heating_off:
    url: https://IP_ADDRESS:8888/api/v1/coils/6/0
    method: POST
    icon: mdi:scent-off
    verify_ssl: false
  penguin_max_cooling_on:
    url: https://192.168.0.210:8888/api/v1/coils/7/1
    method: POST
    verify_ssl: false
  penguin_max_cooling_off:
    url: https://192.168.0.210:8888/api/v1/coils/7/0
    method: POST
    verify_ssl: false
  penguin_temperature_up:
    url: https://192.168.0.210:8888/api/v1/temperature/up
    method: POST
    verify_ssl: false
  penguin_temperature_down:
    url: https://192.168.0.210:8888/api/v1/temperature/down
    method: POST
    verify_ssl: false